SERNIS Featured in Intertraffic World Magazine 2026

SERNIS

We offer a range of customizable and high-tech devices that enhance the safety of pedestrian crosswalks. You can mix and match our devices to create the best crosswalk solutions for your specific needs. 
However, given our extensive options, we understand that choosing the right combination of devices can be challenging. To simplify your decision-making process, we have prepared a guide for you to explore our Typical Crosswalk Solutions and find the one that suits your road safety project best.

Crosswalk Solutions

SERNIS is a dynamic Portuguese company, that epitomizes innovation across Road Safety.
Renowned for R&D prowess and manufacturing excellence, SERNIS leads in Road Safety markets with cutting-edge products like LED smart road studs, flexible bollards, LED traffic signs, and smart systems.
A problem-solving and solutions-oriented powerhouse, SERNIS is at the forefront of enhancing global road safety through its innovative solutions.

SERNIS - Tecnologic Solutions

Introducing the Next Generation of Road Studs – SR-45C & SR-48C

"There is a way to do it better – find it." – Thomas Edison

At SERNIS, this belief has always driven us to push the boundaries of innovation. 
A few years ago, we introduced anti-capillary cables to prevent water ingress and reduce maintenance challenges. This was a breakthrough, but we knew we could go further. Today, we are excited to introduce the new Road Studs SR-45C and SR-48C.


These new models are a perfect combination of cutting-edge safety technology, innovative design, and advanced engineering. The biggest upgrade? A revolutionary O-ring seal system that eliminates the need for silicone, making maintenance faster, cleaner, and far more efficient.


Why the O-Ring System Matters
The introduction of the O-ring system is a game-changer for road maintenance. The silicone-free junction sealing technology used in the SR-45C and SR-48C makes maintenance easier and more efficient. Traditional silicone seals can be messy and time-consuming to replace. With the O-ring seal, maintenance is streamlined, allowing workers to complete tasks more quickly, with less disruption to road traffic.

Less Road Disruption, Safer Travel
We understand that roadwork and maintenance can cause significant disruption to traffic, leading to delays and frustration for road users. That’s why the new Road Studs SR-45C and SR-48C are designed to minimize roadwork time. The faster and easier maintenance process reduces the duration of road closures, ensuring smoother traffic flow and safer travel for everyone.


The Future of Road Studs
With the Road Studs SR-45C and SR-48C, we have found a better way. These improvements represent the future of road studs—combining durability, performance, and ease of use. Whether you're facing harsh winters, heavy traffic, or the need for quick maintenance, these road studs are designed to perform under any conditions.

Experience the Difference Today
Join us in making roads safer, more reliable, and easier to maintain. The Road Studs SR-45C and SR-48C are available now, ready to provide a better, smarter solution for road safety and maintenance.

Introducing the SR-IPW: The Inductive Road Stud Redefining Road Safety

Unveiling the Future of Road Safety
At SERNIS, we believe in shaping the future of road safety through innovation. Today, we are proud to introduce the SR-IPW Inductive Road Stud, a groundbreaking solution that combines cutting-edge technology with practical benefits for safer, more efficient roads. Designed with advanced inductive power transfer and an innovative O-ring sealing system, the SR-IPW redefines what road studs can achieve.

Inductive Power Transfer: A Revolutionary Core
The SR-IPW features an inductive power transfer system, eliminating physical wiring between the base and light module. This electromagnetic technology ensures:
- Increased Durability: No electrical connections to wear out or fail.
- Simplified Maintenance: Components can be swapped out quickly without complex electrical repairs.
- Enhanced Safety: Reduced traffic disruptions and faster interventions.
This innovation minimizes road closures and operational downtime, significantly improving efficiency for road authorities.

Plug & Light Concept: Faster Installation and Maintenance
With its revolutionary "Plug & Light" design, the SR-IPW simplifies both installation and maintenance. By removing physical wiring, the system ensures:
- Ease of Installation: A streamlined process that saves time and reduces initial setup costs.
- Quick Maintenance: A plug-and-play approach for fast component replacement.
-  Environmental Benefits: Lower carbon footprint due to reduced maintenance interventions.

Built for Tough Environments
Engineered to withstand heavy traffic and extreme weather, the SR-IPW boasts:
- Mechanical Strength: Withstands up to 120 tons of pressure.
- IP68/IK10 Rating: Unparalleled protection against water, dust, and impact.
- Compatibility with Controllers: Enables customization of light intensity and operation modes to suit varying road conditions.
Whether on highways, tunnels, or roads exposed to snowplows, the SR-IPW delivers consistent performance and durability.

Introducing the O-Ring Sealing System
Traditional road studs often rely on silicone seals that can be challenging to replace. The SR-IPW’s O-ring sealing system:
-  Improves Reliability: Forms a tight, long-lasting seal.
- Streamlines Maintenance: Reduces time, effort, and mess during interventions.
- Minimizes Disruptions: Ensures roads stay operational with minimal impact on traffic.

Tailored Solutions for Every Road
Available in two configurations—unidirectional (SR-45C-IPW) and bidirectional (SR-48C-IPW)—the SR-IPW meets diverse road safety needs, providing high-intensity LEDs visible up to 1 km.

Elevating Road Safety
The SR-IPW is more than a product; it’s a commitment to innovation and safety. By integrating inductive technology with robust design, SERNIS is paving the way for a safer future. Explore the possibilities of the SR-IPW today.

Why Flexible Bollards Are Ideal for Cycle Path Delineation

Cycle paths are expanding across cities, but not all infrastructure is bike-safe. Flexible bollards are proving essential for creating physical separation that’s visible, safe, and resilient.

Common Risks in Cycle Paths
- Shared spaces with cars
- Inadequate visual separation
- Hard barriers that cause injuries in accidents

Benefits of Flexible Bollards in Bike Infrastructure
- Impact-Friendly: Won’t harm cyclists during a collision
- Highly Visible: Day/night visibility with optional reflectors or LEDs
- Resilient Materials: Return to original shape after impact
- Easy Installation: Quick mounting on various surfaces

SERNIS Solutions for Cycle Paths
- SR-BALI: Versatile and impact-resistant, quickly returns to original shape, available in multiple colors.
- SR-CITY-BALI: Designed specifically for urban mobility
- SR-BALI-LF-CP/SR-CITY-BALI-CP: Features bike signage, ideal for cycle paths.
All models offer UV protection and high flexibility in extreme weather.

Conclusion
Flexible bollards are not just safer, they’re smarter. For cities investing in safe cycling, SERNIS bollards offer reliability and adaptability that traditional posts can’t match.
 
Need expert advice? Our commercial team is here: sernis@sernis.com

In Dubai, Crosswalk Safety Gets a Ground-Level Upgrade

In the heart of Dubai, where modern architecture meets relentless traffic, pedestrian safety faces unique challenges. Crosswalks must compete for attention in an environment of constant motion, cars, buses, delivery trucks, and the occasional impatient driver rushing to their next destination.

In such a setting, every fraction of a second matters. The clearer the signal, the quicker the driver’s reaction. That is why Dubai turned to SERNIS’ SR-50-RYG, a robust road stud that displays the same red, amber, and green sequence as the traffic lights, but right where drivers are already looking: the road ahead.

From concept to reality in Dubai’s streets
This is not theory. Dubai’s Roads and Transport Authority (RTA) has already installed the SR-50-RYG at multiple pedestrian crossings, embedding the signals directly into the tarmac. Phase Two of the project ended on June and added 10 more crossings, bringing the total to 27 sites now equipped with SR-50-RYG road studs across the emirate.

Mohammed Al Ali, Director of Intelligent Traffic Management Department, RTA, explains:
“The Smart Pedestrian Signals technology is operated by a system reliant on sensors connected to a ground optical system synchronized with the signal’s light operation. It perceives pedestrian movement before and during crossing, significantly enhancing pedestrian safety while boosting traffic efficiency and ensuring better management of signal timing.”
The idea is elegantly simple: when the traffic light turns green, so does the road stud. Amber? The stud mirrors that. Red? The unmistakable glow appears at wheel level, directly in the driver’s path. By reinforcing the message from above with light from below, the crossing becomes harder to miss, harder to misinterpret, and harder to ignore.

Why the SR-50-RYG works where others struggle
The Dubai climate can be merciless. Summer temperatures push the limits of most equipment. Fine dust drifts through every gap. Heavy trucks pound the roads day and night. Any solution that hopes to survive here must be engineered for extremes: and the SR-50-RYG is built exactly for that.
- Its IP68 sealing ensures no dust or water intrusion.
- Stainless steel and polycarbonate construction withstands constant stress.
- With mechanical resistance up to 160 tons, it shrugs off the heaviest vehicles.
- Rising only 4 mm above the surface, it’s safe for all road users and even snowplow-ready for colder climates.
In other words, if it works here, it will work anywhere.

Zero Accidents and Measurable Impact
The results speak for themselves. Al Ali adds:
“The system proved effective in improving pedestrian safety for those who require more time to cross—elderly residents, people of determination, or individuals with luggage or pushchairs. Since the introduction of smart pedestrian signals, no pedestrian accidents have occurred at the equipped crossings. Vehicle flow has also improved, as the system adapts traffic light timing when no pedestrians are detected.”

Beyond the crossing – a vision for safer roads
The SR-50-RYG is more than a piece of hardware. It’s a philosophy of layered safety. Drivers don’t always catch the traffic light in their peripheral vision, especially in poor visibility from rain, dust storms, or low sun glare.
By adding a second, ground-level signal, you increase redundancy. It’s like having a co-pilot in every lane, quietly reminding drivers of the rules at the very moment they matter most.
It’s a small change that can transform driver’s behavior, reduce violations, and give pedestrians a little more peace of mind when stepping onto the road.

Why choose SERNIS for your project
When SERNIS develops a road safety solution, it’s not about quick fixes. It’s about engineering products that last, perform, and adapt to local challenges, whether that’s the heat of Dubai, the snow of Northern Europe, or the heavy rains of Southeast Asia.

From design and manufacturing in Portugal to installation support worldwide, we ensure every SR-50-RYG delivers the same uncompromising quality. And we don’t just sell a product, we work with our partners to tailor each installation to the needs of their roads, traffic patterns, and safety goals.

The future is already here — will your city be next?
In Dubai, drivers are already seeing the difference. Pedestrians are crossing with greater confidence. And the SR-50-RYG quietly does its job, day and night, without fuss.

The question is no longer whether this technology works, it’s whether your city can afford not to have it.
Contact the SERNIS team today at sernis@sernis.com to explore how the SR-50-RYG can be integrated into your crossings. 
The next safer street could be yours.

https://www.sernis.com/news/flexible-bollards-street-smart-people-safe-and-shock-proof/

Why the humble flexible bollard is a real hero in urban safety.
This is a win-win thing.
Cars don’t know it’s rubber, and even if they did, they wouldn’t want to hit it. Drivers see a bollard and instinctively slow down or stop. That’s already one safety victory right there.
But here’s the twist: unlike traditional metal or concrete posts, when someone does bump into it, nothing dramatic happens.
- A pedestrian might bump into it, but with less harm.
- A cyclist doesn’t hurt so badly.
- A scooter rider takes a gentler hit.
- A child doesn’t get severely injured if they bump into it while playing.
- And a blind person doesn’t get hurt — they just keep walking, guided safely by design that respects everyone.

Why They Flex (And Why That Matters)
Here’s a fact many people don’t realize: flexible bollards are not just “soft for fun.” They’re designed to flex under vehicles.
These bollards are commonly used around walking lanes, cycling paths, and pedestrian areas. They stop mindless drivers from entering. In some countries they allow emergency vehicles, garbage trucks, and city service vehicles to drive over them if needed.

Think about it:
A normal bollard would have to be extremely robust to stop a speeding vehicle - even steel ones only give the illusion of safety.
If it’s not flexible, either the bollard gets mowed over, or the whole foundation gets damaged.
If the foundation were built to stop vehicles fully, a single bollard would cost ten times as much.
Flexible bollards hit the sweet spot: they discourage parking, stop unauthorized vehicles, and protect pedestrians, cyclists, and vulnerable road users, without needing constant replacement.

Human-Centered Design
It’s not just about stopping cars. Flexible bollards are designed to minimize injuries:
- Cyclists and scooter riders are much less likely to get hurt.
- Children playing on streets are safer.
- People with visual impairments are less likely to get injured by surprise obstacles.
Traditional rigid bollards on sidewalks can be extremely dangerous, but a flexible bollard is guiding, not punishing. In short: they protect people while still doing their job.

Guiding Without Restricting
Flexible bollards give drivers clear boundaries while letting pedestrians move freely. These bollards focus on controlling vehicles without limiting people.
This approach creates safe, intuitive spaces where people can move freely, and vehicles understand their limits, a careful, human-centered design solution that works for the space. And of course, there are more robust bollards available if additional protection is needed.

SR-CITY-BALI: The Best of Both Worlds
For cities that want the look of traditional steel with the safety of modern materials, SERNIS’ SR-CITY-BALI is the answer.
These bollards look like metal, fitting seamlessly into urban landscapes, but are stronger than typical flexible bollards. When struck, they blend 90° to the ground, minimizing damage to vehicles, pedestrians, and cyclists — and then return upright, ready for continued use.
It reinforces urban separation and pedestrian safety while serving as a cost-effective, low-maintenance alternative to cast iron bollards.
For urban planners and road safety specialists, SR-CITY-BALI delivers the perfect balance of function, protection, and style — a bollard that’s as practical as it is visually integrated.

The Right Place for the Right Bollard
Location matters. Flexible bollards shine when they’re strategically placed:
- Walkways and cycle paths.
- Pedestrian zones, and urban squares.
- On streets where city vehicles occasionally need access.
- Parking lots, protecting sidewalks and ensuring safe traffic flow.
- Anywhere you want to discourage unauthorized parking or unsafe driving.
The goal isn’t to build a fortress. It’s to create streets that are smart, safe, and inclusive.

The Takeaway
Flexible bollards:
- Look firm, act smart, and stay kind.
- Protect humans first, vehicles second.
- Allow authorized vehicles through, stop the rest.
- Reduce maintenance costs compared to rigid solutions.
- Bounce back when hit, literally and figuratively.

Protect pedestrians and cyclists while guiding vehicles safely: let SERNIS flexible bollards bring urban empathy to your streets. Contact us at sernis@sernis.com to learn more.

SERNIS Sustainability: More Than a Feature

At SERNIS, we’ve never treated sustainability as a trend. For us, it’s been a quiet but constant part of how we work — not a separate department, but a mindset that touches every product, every process, every decision.
We know that the people who choose SERNIS don’t just expect innovation. They expect responsibility. So, this month, we’re putting into words what has long been part of our DNA: how we build sustainability into everything we do.

We don’t wait for regulations — we act with intention
Whether we’re producing our road studs, our flexible bollards or other road safety solutions, our approach is the same: design for durability, choose materials with care, and optimize for efficiency. These aren’t just nice-to-haves — they’re choices we’ve made deliberately, over many years, to reduce waste, extend product life, and lower environmental impact.
Here’s what that looks like in practice:

Durable by Design
We build things to last. Not just to resist impact, weather or wear, but to be easily maintained and repaired instead of replaced.
- Our road studs use a modular system — when the electronics need replacement, the entire product doesn’t have to go to waste.
- Our O-Ring sealing system makes maintenance faster, cleaner and safer for road workers — reducing the need for disruptive interventions.
- In every product, we seek out ways to simplify the structure, reduce the number of components and ensure that each one has a purpose.

Materials That Matter
Every choice of material comes with a footprint. That’s why we:
- Prioritize recycled and recyclable plastics, especially in our flexible bollards.
- Use sustainable metals (like stainless steel and certified aluminum) from trusted European suppliers.
- Avoid toxic substances — all our electronics are RoHS compliant, meeting strict limits on hazardous materials.

Energy Efficiency, From Product to Production
- We design our LED-based products to use minimal energy, thanks to efficient power management. But our commitment goes far beyond the products:
- We use solar panels and LED lighting in our factory to significantly cut our electricity consumption.
- We’ve invested in low-consumption production equipment and apply preventive maintenance to keep systems running at peak efficiency.
- Every component is tested before final assembly, reducing rework, energy use and waste.

Minimizing Waste (Especially Electronic Waste)
Electronic waste is one of the most difficult kinds to handle — and one we’re determined to keep to a minimum.
- Our team uses a First-In-First-Out system to avoid obsolete stock and ensure full material use.
- We carry out quarterly loss analysis to track and improve.
- And even when we have small quantities, we send electronic waste to certified recyclers.

Smarter Logistics and Local Sourcing
- We prefer local and Iberian suppliers to cut the emissions of long-distance transport.
- Wherever possible, we use reusable packaging with our partners and optimize every delivery for space and weight.
- We favor rail and sea transport over air when shipping abroad.
- We keep packaging volumes to a minimum — always without compromising product protection.

A Lean Factory Is a Green Factory
We apply Lean Manufacturing principles throughout our operations. That means:
- We only produce what’s needed, when it’s needed — avoiding excess stock and unnecessary production.
- We’ve standardized and streamlined our processes, so each one runs as efficiently as possible.
- And our teams are trained to spot and solve inefficiencies, with continuous improvement at the core of how we work.

More Than a Policy — It’s a Practice
For us, sustainability isn’t a side project. It’s embedded in our engineering, our design decisions, our supply chain and our culture. It’s part of how we innovate, and why our partners trust our products to stand the test of time — technically, economically and environmentally.
We know we’re not perfect, but we believe that responsibility is built step by step, and we’re committed to improving every day.

If you're working with SERNIS — or considering it — know that sustainability isn't an afterthought here. It's part of every product we make, and every decision we take.

Mitigating Distraction-Related Risks in Urban Mobility: The Role of Smart Crosswalk Systems

As urban mobility infrastructures evolve to accommodate emerging transportation paradigms, the issue of inattentional blindness—whether in drivers or pedestrians—has become a critical road safety challenge. Despite advancements in vehicle safety systems, NHTSA data reveals that pedestrian fatalities now account for 17% of all traffic deaths, a 20-year high largely attributable to cognitive distraction from mobile devices.

The Neuroscience of Distraction: Quantifying the Risk
Research demonstrates alarming trends:

Driver Distraction:
- 5-second blind spots: Reading a text at 55 mph = driving a full football field without looking (NHTSA).
- Cognitive overload: Texting degrades reaction times 2x worse than drunk driving (Virginia Tech Transportation Institute).

Pedestrian Dangers:
- 1 in 3 pedestrians at risky intersections are texting or talking (Seattle DOT, 2012).
- 2 million annual injuries result from distracted walking (Ohio State University study).
- 38% slower hazard detection when using headphones (Journal of Safety Research, 2021).

Emerging Threats:
- Autonomous vehicles struggle to recognize distracted pedestrians (University of British Columbia study).
- 7-meter longer stopping distances at 50 km/h due to delayed reactions (TRB, 2023).

Smart Crosswalks: A Proactive Safety Solution
As cities seek data-driven interventions, innovative technologies like SR-CROSSLED by SERNIS are proving vital in mitigating distraction-related risks—particularly at night and in high-traffic zones.

How SR-CROSSLED Enhances Visibility and Saves Lives
The SR-CROSSLED system makes crosswalks extraordinarily difficult to miss through illumination, blending seamlessly into urban landscapes while putting safety first.

Models Tailored for Specific Needs:
SR-CROSSLED-150
Installation: Crosswalk entry points (parallel to pedestrian flow) + along crosswalk lines (top-mounted on markings).
Key Role: First-alert system for approaching pedestrians/vehicles.
Differentiator: Compact yet highly effective visibility solution.

SR-CROSSLED-L
Installation: Crosswalk entry points (parallel to pedestrian flow).
Key Role: Traffic-light synchronized color guidance (Red/Green/Amber).

Engineered for Resilience
SR-CROSSLED meets the highest durability standards (EN124 Class D400), tested to resist 400 kN of force. Key features include:

Uncompromising Durability
- EN124-D400 certified (400 kN load capacity).
- Hybrid construction (stainless-steel + polycarbonate).
- IP68/IK10 rated (waterproof and impact-resistant).
- Temperature-resistant (-25°C to +85°C operational range).

Urban-Adaptive Design
- Low-profile architecture (seamless pavement integration).
- Aesthetic preservation (discreet yet effective visual language).
- Non-intrusive installation (zero circulation disruption).

Smart Maintenance
- Modular components minimize roadwork downtime.

Optimized Visibility
- Glare-free uniform illumination (120° viewing angle).
- Adaptive luminosity (auto-adjusts to ambient light - controller required).

A Safer Future Starts Today
While behavioral interventions remain necessary, passive safety systems like SR-CROSSLED provide deterministic protection against distraction-related errors.

Ideal for municipalities seeking Vision Zero collision reduction targets.

SR-CROSSLED in the News
SERNIS’s SR-CROSSLED is making headlines! Discover how media outlets are highlighting the impact of our smart crosswalk system:

Intertraffic World 2024 | Daily News 2024 | ITS International 2024 | Intertraffic World 2023 | ITS International 2023 | ITS Magazine 2023 | ITS International 2021 | ITS Magazine 2021

Ready to transform your city’s crosswalks?
Explore how SERNIS’s engineered countermeasure can enhance your Safe Systems Approach—before distraction leads to tragedy.
Contact our team to discuss a tailored solution for your urban mobility challenges.

NO NEED TO DRILL: Get To Know SR-BALI New Accessory

SERNIS' Flexible Bollards have a new accessory that will make your next projects easier and faster.
SR-BALI-BASE is a cutting-edge product that allows the installation of SERNIS bollards WITHOUT THE NEED TO DRILL. You just need to glue the base to the surface and install the bollard!

This accessory will make it easier to remove the Flexible Bollard either for maintenance/change or for spur-of-the-moment needs such as the temporary removal of bollards to allow traffic to pass through certain previously permanently restricted areas.

The SR-BALI-BASE is made from the same material as the SR-BALI range, giving it the same high impact resistance and UV protection for increased durability.

It can be used on all SERNIS' Flexible Bollards with 80cm of diameter and screw M24.

Improve Urban Experience With SR-CITY-BALI

SR-CITY-BALI improves people's urban experience, increasing the safety and ability of pedestrians to walk freely in urban centers.

Improve Urban Experience
SR-CITY-BALI reinforces separation and cohesion in urban landscape design, improving people's urban experience, and increasing the safety and ability of pedestrians to walk freely in urban centers.
SR-CITY-BALI are ideal for increasing safety in urban centers by replacing traditional steel bollards that can cause serious damage (in vehicles and people) and have high maintenance costs.
SR-CITY-BALI are resistant to light and heavy vehicles.
Made of durable and rigid (yet flexible) material, the bollards ensure long-lasting performance.

Urban Mobility
The urban mobility paradigm is changing, and Smart Cities have to keep up with this change. 
Walking, cycling, or riding e-scooters in cities can be as fast as traveling by car or public transport provided there are conditions and infrastructure suitable for this.
Historically this has been neglected, but we are currently witnessing a rebirth of these (more active) modes of transportation as people recognize their health and environmental benefits.

Durability
The SR-CITY-BALI are resistant to light and heavy vehicles. Made of durable and rigid material, SERNIS high-tech bollards ensure long-lasting performance.
Reflective tapes and crystal tapes make them highly visible by day and (especially) at night.

Safety
The presence of SR-CITY-BALI creates a visual barrier that helps to direct and control traffic by defining limits of space.
SR-CITY-BALI has been developed to bend under pressure.

SR-CITY-BALI is also available on brown (SR-CITY-BALI-W) as a Nature Unobtrusive Wood Look Bollard.

Solar Road Studs are an Energy-Efficient Road Safety Solution

Solar Road Studs, also known as solar road markers, are solar-powered road safety warning lights that are often placed on the road surface.
Solar Road Studs are low-maintenance solar cell-powered LED illumination devices that delineate road borders and centerlines. They provide drivers with a longer reaction window since they are embedded in the road surface.
The primary function of these lights is to indicate the direction of the road, particularly in challenging rainy or foggy circumstances, as well as to encourage drivers to pay attention to the driving path ahead. Solar road studs significantly increase road safety and minimize the incidence of traffic accidents.
Solar Road Studs are specifically developed to mark crosswalks, roundabouts, and traffic islands, among other things.
You can explore SERNIS Solar Road Studs Range here.

Innovative Solar Road Studs
SR-i19 and SR-i25 are two new solar road studs that use microcontroller technology, have a low profile raising from the surface (9 and 10mm respectively), and are ideal for road delineation, bends/curves, and crosswalks among other applications. 
SR-i19 cutting-edge design gives it greater lighting power (higher light output due to its 3 LEDs for each side) and makes it more resistant (the aluminum base gives it strong mechanical resistance).
The innovative solar road stud SR-i25  has a stainless-steel cap that makes it ready for snowplow machines. The GPS technology built-in allows flashing synchronization. It has high mechanical resistance and a high-performance photovoltaic solar module. 

Solar energy powers road studs, which light up automatically at night 
SERNIS solar road studs are made of an active illumination LED light source and can operate independently for several years. They have a high level of durability, which removes the need for costly cabling installation.
LEDs are much brighter than standard reflective road studs and provide 1km visibility. Solar energy powers the road studs, which light up automatically at night. During daylight hours, the solar cells charge batteries or capacitors, and the LEDs are switched off.
Solar energy sources, as the name indicates, generate ecologically friendly power from sunlight.

Easy to install and maintain
Solar Road Studs require no need for wiring and can be installed anywhere, no matter how remote the location is or how far the location is from the grid. All that is required is to install these lights on the roads and let them be there for years to come since they would not require frequent maintenance.
These intelligent Solar Road Studs operate independently in the open air and they have their own power supply (solar cell), the electrical wiring is eliminated, resulting in a quick and convenient installation.
These features make the Solar Road Studs highly energy-efficient, environment-friendly, and easy to install and maintain.   

Particular applications
SERNIS' innovative design and technology make some of our Solar Road Studs (SR-i25 and SR-i40) snow plough resistant and boost road safety for many years.


Solar road studs are a novel approach primarily intended to improve traffic safety. These lighting products, however, may also be utilized in various applications, such as bike lanes and square and park landscape illumination.
Aside from energy savings, Solar Road Studs improve driver visibility and are a step toward the finest traffic management system.

Sleep Mode
After 24 hours without being activated, SERNIS Solar Road Studs go into Sleep Mode. This means that they can be stored for long periods of time without reaching critically low levels of power.  
The Solar Road Studs are loaded to the maximum level when leaving the factory and - activate the Sleep Mode after 24 hours without use - it can preserve the energy without damage.

i-Stud evolution technology 
i-stud evolution technology applied to some of SERNIS Solar Road Studs increases the performance of solar power studs with energy storage by battery or capacitor. The main advantage of i-stud evolution is the use of microcontroller technology inside each stud, which allows several beneficial features and control options.

KEY Features
Wake Up/Sleep Function
Allows the stud to stay in "sleep" mode before the application, extending the autonomy of the battery

Automatic Brightness Control
Manages the energy stored, adapt the brightness, and regulates the light level in accordance with the energy-charged during the day

Definition of the Working Period
Set up the number of hours the i-stud should work after night detection (when roads studs do not have to operate all night long)

Operation Mode Flash/Steady
Switch the stud’s mode from ‘flashing’ to ‘steady’ and vice versa after installation

Flash Rate
Adaptation of the flash rate after the installation

Night Level Detection
Adjustment of the lighting level detection (Lux) 

Operation Mode Uni or Bi-directional 
Modify the light direction temporarily or permanently

Low Temperature
Detects the possibility of ice forming on roads and changes the LEDs color to warn drivers about the dangerous weather condition (option available)
	
Log File
If a problem with the stud is detected the unit is able to make an internal log to discover what are the causes of the problem

Advantages of Solar Road Studs
Autonomous solar energy
High luminous brightness visible up to 1km
A light source that is brighter than typical reflective road studs.
Improves driver response time
Reduce light pollution
Drastically decrease in road accidents
Bikers friendly
Low surface rise 
Ready for snow plough machines
LEDs that are unidirectional or bidirectional
Simple installation with no maintenance

Application of Solar Road Studs
Warn drivers of approaching road hazards or road work
Highways and roads without conventional street lighting, on-road sections lacking isolation belts, and insufficient night lighting
Toll entrances on high-speed highways direct in and out
Road illumination around the city
Road illumination on twisting, dangerous rural roads
Illumination of bike lanes at night
Improving road lighting at industrial or shipping locations
Sidewalks, crosswalks, roundabouts, and traffic islands (urban infrastructures)
Landscape illumination as route, deck, pierce, dock, and bridge indicators in parks and hotels.
Industrial sites like outdoor parking lots, private roads, shipping sites, loading docks, warehouses, mining operations, etc.

The Science of Speed Feedback and Driver Behavior

Why Real-Time Speed Feedback Works
Drivers rarely adjust behavior simply because a speed limit exists. Most speeding happens unintentionally: people rely on “how fast it feels” instead of accurate perception. Real-time speed feedback interrupts this pattern by showing drivers objective, external information at the exact moment they need it.

This effect is rooted in a well-known behavioral mechanism: feedback loops. When a driver sees “Your speed: 68 km/h” while entering a 50 km/h zone, the brain immediately processes:
- Evidence: “I’m going faster than I thought.”
- Relevance: The driver compares their speed to the limit.
- Consequence: The brain recalls risks: tickets, crashes, danger to pedestrians.
- Action: Most motorists slow down almost instantly.
Studies consistently show that speed meter display signs reduce average speeds, especially among drivers who exceed limits the most, the same group responsible for most severe accidents.

The Psychology Behind the Change
Speed feedback works because it:
- Breaks autopilot: Drivers shift from unconscious to conscious decision-making.
- Activates social norms: A public display feels like “being observed,” which increases compliance.
- Creates positive habits: Repeated exposure builds long-term speed awareness, particularly near schools, residential streets, and transition zones.
Research from multiple countries confirms that dynamic speed signs encourage sustained reductions in speeding, not just momentary ones.

How Technology Strengthens the Feedback Loop
Modern systems enhance the psychological effect by improving visibility and clarity.

SERNIS integrates these principles in products such as:
SRL-SM – Real-Time Speed Awareness
SRL-SM is a Doppler-radar speed meter that displays motorists’ speed with high-brightness LEDs, ensuring drivers receive clear, immediate feedback. Its readability - even in direct sunlight - strengthens the behavioral response.

SRL-SMDDC – Speed Meter with Data Cloud
SRL-SMDDC is a newer, more advanced model that combines real-time feedback with analytics.
The Data Cloud allows authorities to monitor speeding patterns, peak traffic hours, and average speeds over time. This makes it easier to identify high-risk areas and adjust safety strategies based on evidence, not assumptions.

Both systems are examples of how technology supports, but doesn’t replace, the psychological foundation: people change behavior when confronted with precise, unavoidable information.

Conclusion
Real-time speed feedback isn’t just a digital display, it’s a proven behavioral tool rooted in psychological science. By making drivers immediately aware of their actions, speed meters turn unconscious speeding into conscious correction.
Whether implemented through traditional systems like SRL-SM or advanced data-driven solutions like SRL-SMDDC, speed feedback remains one of the most effective, research-supported strategies to make roads safer.

Take Action for Safer Roads
Want to see measurable improvements in driver’s behavior on your streets? Discover how SERNIS speed meters, from the SRL-SM to the SRL-SMDDC, can help create safer, calmer traffic. Contact our team today at sernis@sernis.com.

Tunnel Safety? Light Years Ahead with SR-T24

Visibility inside tunnels can make the difference between a safe journey and a dangerous situation. Poor lighting and lack of guidance often lead to disorientation and accidents. SERNIS’ SR-T24 Tunnel Guidance Road Stud was engineered specifically for these environments, providing continuous, high-brightness illumination and reliable performance in the most demanding conditions.

Why Tunnel Guidance Matters
Tunnels present unique visibility challenges because natural light is absent. SR-T24 addresses this issue with powerful LED illumination, robust construction, and customizable configurations, ensuring drivers and operators maintain clear visual guidance day and night.
With up to 1 km of visibility, the SR-T24 keeps traffic moving safely, even in long or curved tunnels where line of sight is limited.

Designed for Harsh Tunnel Environments
Every feature of the SR-T24 is built around performance and durability:
- Robust Construction: Heavy-duty anodized aluminum body with - - IP68 and IK10 protection ensures resistance to dust, water, and impact.
- LED Polycarbonate Lens Protection: Guarantees longevity and consistent brightness.
- Wired Power System: Operates on 24V DC or 230V AC, ensuring stable performance with low energy consumption.
- Extreme Temperature Resistance: Reliable from -25ºC to +85ºC, perfect for tunnels with fluctuating climates.
- Up to 1 Km Visibility: Thanks to its high-intensity LEDs, drivers can perceive the road layout clearly at long distances.

Flexible Configuration for Every Application
SR-T24 can be customized to meet the unique needs of each tunnel environment:
- Unidirectional or Bidirectional Lighting (available in 24VDC or 230VDC)
- Arrows or Parallel Lines on Top for intuitive directional guidance
Wide Range of LED Colors: White, Warm White, Red, Amber, Green, Blue
- Always-On Mode (standard), with flashing or sequential modes available via external controller
This modular flexibility allows tunnel designers to create optimal lighting and guidance systems adapted to road geometry and safety requirements.

Where the SR-T24 Makes a Difference
SR-T24 is ideal for:
- Highway tunnels that require long-distance visibility
- Urban or industrial tunnels with heavy vehicle traffic
- Railway or underground passages where safety and direction must be unmistakable
Across these applications, operators benefit from reduced maintenance, lower power costs, and greater safety for all tunnel users.

Conclusion:
When visibility is critical, the SR-T24 delivers reliability, durability, and brightness. Engineered for tunnels, built for safety, it’s the solution that keeps drivers oriented and roads illuminated, no matter how dark the path ahead.

Looking to enhance tunnel safety? Contact our team: sernis@sernis.com

Intelligent Pedestrian Crosswalk System Transforms Road Safety in Braga | Case Study

Details
CLIENT: Municipality of Braga
PROJECT: Implementation of Intelligent Pedestrian Crosswalk System on Problematic Roads
COUNTRY: Portugal
MARKET SECTOR: Road Safety
EQUIPMENT: SR-IPCS, SR-45

Overview
In 2008, the Municipality of Braga partnered with SERNIS to address high accident rates, poor signage, and insufficient crosswalk warnings, especially near schools and busy areas. Dedicated to enhancing road safety conditions and management, the city council consistently seeks out solutions that effectively reduce road traffic accidents.

Needs and Motives
Upon analyzing road traffic safety in Braga, several crosswalks were identified with serious issues, including:
- High number of accidents
- Deteriorated static signs
- Insufficient warning systems
- Inappropriate behavior of road infrastructure users
The most critical areas were those with significant pedestrian movement near schools and high-traffic roads with two or more lanes.

Project Description
Given the pressing issues in specific locations, it became urgent to take action to significantly reduce road accidents in Braga. SERNIS introduced the SR-IPCS, now known as SR-TICS, on two of the city's most hazardous roads, providing efficient alerts and reduced maintenance costs. This system helps reduce the number of accidents and injuries involving motor vehicles and pedestrians.

The Intelligent Pedestrian Crosswalk System (SR-IPCS) was the ideal solution to enhance signalization and security due to its dynamic warning system, efficient alert signals, low power consumption, and reduced maintenance costs.

Intelligent Pedestrian Crosswalk System | SR-IPCS
The SR-IPCS detects pedestrians at crosswalks using real-time image processing and automatically manages a set of warnings through vertical signs and road studs. The warnings are displayed on both sides of the road across all traffic lanes. When pedestrians are crossing, the colors of the LED signs and road studs change to red to capture drivers' attention.

Impact
Since the installation of the SR-IPCS, Braga has seen a clear improvement in road traffic safety:
- Sharp decline in road accident rates
- Significant reduction in the number of crashes
- Decrease in victims with severe injuries
- Elimination of serious accidents
- High increase in pedestrian safety levels
Over time, upgraded versions like Crosswalk Solutions were installed across Braga, further boosting safety. The SR-IPCS effectively addressed serious road safety problems in the city, especially at crosswalks. The system prevents drivers from approaching crosswalk zones too quickly and alerts them when pedestrians are detected. The Municipality of Braga is very satisfied with the successful results achieved, particularly the improvement in citizen safety.

Testimonial
“(…) The SR-IPCS was a sustainable solution to solve with high efficiency some road traffic problems in Braga.
The system encourages responsible driving and help to keep our roads safe. The number of crashes at crosswalks has significantly reduced and accident risk decreased as well. 
Braga Municipality is very happy with the successful results achieved”.
- Eng. Alfredo Barata, Road safety division, Braga Municipality
Conclusion
The SR-IPCS has proven to be a sustainable solution to Braga's road traffic problems. By encouraging responsible driving and enhancing road safety, the number of crashes at crosswalks has significantly decreased, and accident risk has been minimized. The Municipality of Braga is extremely satisfied with the results, noting a substantial improvement in the safety of its citizens.

For more information on how our Intelligent Pedestrian Crosswalk Systems can improve road safety in your area, please contact us.

SR-CITY-BALI-TSL-R

Flexible Luminous Bollards: A New Standard for Urban Safety
Flexible bollards are no longer just about delineation. With the SR-CITY-BALI-TSL-R, SERNIS introduces a new generation of luminous flexible bollards designed to improve visibility, reduce accident severity, and support more sustainable urban mobility.
This solution combines two essential functions in a single product: flexibility for impact safety and LED lighting for visual guidance.

Why Flexible Bollards Matter
Traditional rigid bollards create separation, but they also create risk. In the event of an impact, they transmit all the force to the cyclist or pedestrian, often causing serious injuries. Flexible bollards behave differently. They bend, absorb energy, and return to their original shape, drastically reducing accident severity.
The SR-CITY-BALI-TSL-R was designed with this reality in mind, offering a safer alternative for cycle paths, pedestrian areas, and low-speed traffic zones.

What Makes the SR-CITY-BALI-TSL-R a Luminous Flexible Bollard
This is not just a flexible bollard with a light added on. It is a fully integrated luminous safety element:
Flexible body with shape memory
Integrated LED top light for guidance and visibility
Optional solar power supply
Grid connection possibility
3M reflective tape for passive visibility
The LED light works as a visual reference point, helping users understand space, direction, and boundaries, especially at night or in complex urban layouts.

Solar Powered, Efficient, and Low Maintenance
As a solar LED bollard, the SR-CITY-BALI-TSL-R reduces installation costs and energy dependency. Smart brightness management and LED longevity ensure efficient operation with minimal maintenance. When solar energy is not viable, electrical connection remains available.
This flexibility makes it suitable for both temporary projects and permanent urban infrastructure.

Built for Real Urban Conditions
The SR-CITY-BALI-TSL-R is engineered for demanding outdoor environments:
IP68 waterproof protection
IK10 impact resistance
UV-resistant materials
High visibility even when the LED is off
Durability is guaranteed without sacrificing user safety.
A Safer Alternative to Rigid Urban Infrastructure
Cities are replacing rigid metal bollards with flexible bollards because safety priorities have changed. With the SR-CITY-BALI-TSL-R, SERNIS goes one step further by adding light, turning a passive barrier into an active safety tool.

It protects, guides, and signals.
It does not just separate spaces. It makes them safer.

Featured in Intertraffic World Magazine 2026
The SR-CITY-BALI-TSL-R was recently showcased in Intertraffic World Magazine 2026 as a leading innovation in urban safety solutions.

Ready to Upgrade Urban Safety?
Discover how the SR-CITY-BALI-TSL-R flexible luminous bollard can transform streets, cycle paths, and pedestrian areas into safer, smarter, and more sustainable spaces.
Contact our team at sernis@sernis.com today to request a quote, technical specifications, or a consultation for your urban mobility project. Don’t settle for outdated rigid bollards, make your city safer now.

SR-GROUND-SENSE

Innovative Road Studs & Visibility
We offer an extensive road stud lineup designed to enhance global road safety. Witness the fastest road stud replacement ever engineered: our inductive SR-45C-IPW and SR-48C-IPW featuring a wireless Plug & Light design. These, alongside our SR-45C, SR-48C, and SR-70C, incorporate a silicone-free O-ring seal for highly efficient maintenance. The new SR-60 is a 360-degree hardwired stud engineered for excellent luminosity, ideal for roundabouts and traffic islands.

Smarter Urban Protection & ITS
The new SR-GROUND-SENSE uses Dual-tech Microwave and BLE precision for real-time occupancy validation of parking spots. 
For crosswalks, the SR-CROSSLED-150 improves pedestrian safety with a discreet design blending into urban environments, alerting distracted drivers. The SR-CITY-BALI-TL-R syncs with traffic lights, alerting distracted pedestrians. 
Flexible by design and safe by purpose, SERNIS’ Flexible Bollards range includes the high-impact SR-BALI, SR-BALI-LF for highways, and SR-CITY-BALI for urban safety. The new SR-CITY-BALI-TSL-R features a solar-illuminated top marking pedestrian zones and cycle paths. The new SR-GREEN-BALI blends safety with nature. 
Discover highly customizable LED traffic signs and crosswalk solutions that elevate high-tech pedestrian safety worldwide. Explore custom ITS like SR-SDSFOG or SR-TWWID. Our Variable Message Signs feature durable LED technology for high visibility, complying with European standards.

Championing Active Mobility
For shared roads, the SR-CITY-BALI 300/130 physically divides cars and bikes. Organize paths with Flexible Bollards with Cycle Path Signs (SR-CITY-BALI-CP and SR-BALI-LF-CP), joining our legacy lineup.

SERNIS_FlexibleBollards_TSL-R.png

SR-CITY-BALI-TSL-R is a flexible bollard with solar light on top. This flexible luminous bollard is suitable to provide excellent illumination on public roads and pathways with low energy costs (using LEDs). It is ideal for lighting walkways, bike paths, pedestrian areas, and similar spaces.

SR-CITY-BALI-TSL-R is a flexible bollard with solar light on top.

cTVbng5qtdo

SERNIS_ Human Flexible Bollards-08.png

SR-CITY-BALI is an ideal flexible bollard for urban delimitation, available in 80mm and 130mm. It enhances pedestrian safety and walkability while reinforcing landscape design. UV-protected to prevent fading, these durable plastic bollards bend up to 90 degrees upon impact, minimizing vehicle damage before returning to their upright position. A cost-effective alternative to cast iron, they resist scratches and are easily removable for events, ensuring lasting, low-maintenance performance.

SR-CITY-BALI

SR-CITY-BALI is a Flexible Bollard ideal for urban area delimitation and is available in two diameters: 80mm and 130mm .

SERNIS_FlexibleBollard_Yellow_Intrasigna (1).jpg

SR-BALI is a Flexible Bollard with a simple, modern and clean design with enhanced high memory effect and impact resistance, allowing it to return to original form almost instantly.

Product certified – EN12899-3

SR-BALI

SR-BALI is a Flexible Bollard with simple, modern and clean design with enhanced high memory effect and impact resistance.

SR-CITY-BALI-CP_Application.png

SERNIS flexible bollards with bicycle signage are designed to improve safety and organization on cycle paths. These bollards are ideal for creating clear separation between cycle lanes and traffic, enhancing the overall safety of cyclists while being highly visible and easy to maintain.

SR-CITY-BALI-CP and SR-BALI-LF-CP

SERNIS flexible bollards with bicycle signage are designed to improve safety and organization on cycle paths.

Download

SERNIS_SRL-SMDDC (2).png

The SRL-SMDDC is a solar-powered LED Speed Meter that displays vehicle speeds with friendly icons to improve driver behavior. More than a simple sign, it features a Data Cloud for remote monitoring of battery status and real-time communication. Administrators can analyze detailed speed and traffic counts, identifying peak periods to enhance safety measures. Configurable and user-friendly, the system exports data to CSV, helping authorities create safer residential and school zones.

SRL-SMDDC

SERNIS_SR-SDSFOG_w (3).png

SR-SDSFOG is a system with vehicle detection and warning sensors specially developed for adverse weather conditions, such as fog, to help drivers identify the road borders and vehicles on the road.
The system detects vehicles as they pass by, illuminating a red LED that will alert subsequent drivers that there is another vehicle in the vicinity.

SR-SDSFOG

SERNIS_SR-TICS.png

The Thermal Intelligent Crossing System is a thermal technology based system that detects pedestrians at crosswalks by real time image processing, managing automatically the activation of a set of warnings through vertical signs and road studs to alert drivers in a safe and effective way. The SR-TICS have a thermal camera that don’t see sun glare responding only to the heat signature, detecting and giving you 24-hour detection of vehicles regardless of the amount of light available, reducing the

SR-TICS

Thermal technology detects pedestrians at crosswalk in real-time, auto-activating signs and road studs to alert drivers safely and effectively.

SRL-U2H7_blur (3).jpg

The SRL-U1H7 is an innovative internally illuminated crosswalk overhead sign. To improve the visibility of pedestrians that are crossing, this sign has cold white LEDs that project laterally towards the pavement, enabling drivers to see pedestrians even before they begin to cross the road.

SRL-U1H7

SRL-U1H7 is an innovative internally illuminated crosswalk overhead sign

SERNIS develops LED signs and LED beacons for road safety applications such as pedestrian crossings, curves, intersections, and traffic calming zones. The product range includes LED traffic signs with predefined pictograms, internally illuminated pedestrian signs, chevron LED guidance systems, and compact LED warning beacons designed for continuous outdoor operation and long service life.

SERNIS | LED Signs Catalog

SERNIS_LEDSigns_Portugal.png

SERNIS Vertical signs are optimized to capture the attention of drivers, causing them to make better decisions while driving. SERNIS vertical signaling are visible to more than 2 Km due to high luminous flux LEDs. Its operation mode can be fixed or flashing. They can be powered by solar or electric power. SERNIS develops solutions according to your needs.

LED Signs

SERNIS Vertical signs are optimized to capture the attention of drivers, causing them to make better decisions while driving.

QLTeV8nLUZU

Image

The Thermal Wrong Way Intelligent Detector is a thermal technology based system that detects in real time vehicles driving in wrong way. Vehicles in wrong direction represent a serious risk to road safety. The aim of SR-TWWID is aware drivers in wrong way of the risk in order to get the vehicle in the correct direction before a serious incident happens. To ensure greater reliability, this system have a thermal camera that don’t see sun glare responding only to the heat signature, detecting and giving you 24

SR-TWWID

Enhancing road safety through innovation!

Y6MFsA9Sh3w

_gGx1M3Ry04

HttKIFQqGBI

Oc1zuymgVbo

F1I27WFeC1U

EPuKn2NxLTg

hJepX07_VdI

lX_cp0lkqy8

wzvh6PXTPJM

rRQi1DMw-3k

CBDqpkSfmIA

Tenair

Datalayers

<noscript><iframe src="https://www.googletagmanager.com/ns.html?id=GTM-5VV8H82"
height="0" width="0" style="display:none;visibility:hidden"></iframe></noscript>

Google Tag Manager

Preference center

Cookie Bot

Log in to add this article to your reading list

Would you like to read this article again later?

Intertraffic Amsterdam 2028

Delete Account

As soon as codes are available for this participation, they will appear here. You can then filter, copy, share and export them.

No invitation codes are available yet

Messages

The table below shows the Banner Name(s) that will appear on your stand(s). This name was provided during registration and may differ from the company name in your Company Profile. Changing your company name in the profile does not affect your Banner Name. 
If you wish to change your Banner Name, please contact Account Support.

We are working on creating more insights regarding the stands at RAI. Please visit the FAQ for more information about this topic.

News

Introducing the Next Generation of Road Studs – SR-45C & SR-48C

Introducing the SR-IPW: The Inductive Road Stud Redefining Road Safety

Why Flexible Bollards Are Ideal for Cycle Path Delineation

In Dubai, Crosswalk Safety Gets a Ground-Level Upgrade

Flexible Bollards: Street-Smart, People-Safe, and Shock-Proof

SERNIS Sustainability: More Than a Feature

How Smart Crosswalks Are Fighting Distraction, and Saving Lives

NO NEED TO DRILL: Get To Know SR-BALI New Accessory

Improve Urban Experience With SR-CITY-BALI

Solar Road Studs are an Energy-Efficient Road Safety Solution

The Science of Speed Feedback and Driver Behavior

Tunnel Safety? Light Years Ahead with SR-T24

Intelligent Pedestrian Crosswalk System Transforms Road Safety in Braga | Case Study

Flexible Luminous Bollards: Introducing the SR-CITY-BALI-TSL-R by SERNIS

SERNIS at Intertraffic Amsterdam 2026

Organised by

Intertraffic Global